减速机与工作机的联接：减速机直接套装在工作机主轴上，当减速机运转时，作用在减速机箱体上的反力矩，又安装在减速机箱体上的反力矩支架或由其他方法来平衡。机直接相配，另一端与固定支架联接.

The connection between the reducer and the working machine: the reducer is directly installed on the main shaft of the machine， when the reducer operates， the torque acting on the gearbox body is installed on the reverse torque support on the reduction box body or by other methods to balance. The machine is directly matched and the other end is connected with the fixed support.

减速机一般用于低转速大扭矩的传动设备，把电动机、内燃机或其它高速运转的动力通过减速机的输入轴上的齿数少的齿轮啮合输出轴上的大齿轮来达到减速的目的，reducer生产，普通的减速机也会有几对相同原理齿轮达到理想的减速，大小齿轮的齿数之比，就是传动比。

Reducer is generally used in driving equipment of low speed high torque，reducer生产厂家， large gear gear output shaft power motor， internal combustion engine or other high speed running through the reducer input shaft less number of teeth on the reducer to achieve the pure of general reducer will have several pairs of the same principle to achieve the ideal effect of gear reducer. The size of the number of teeth of the gear ratio， the transmission ratio is.

允许输入法兰：

不能大于或小于临级减速机的标准尺寸，reducer，如减速机PLE80?的标准法兰为80mm，其临级的减速级是PLE60?和PLE120，PLE80?允许法兰不应小于60mm，也不能大于120mm。

Allow input flange

It can"t be greater than or less than the standard  of the reducer. For example， the standard flange of reducer PLE80 is 80mm， and the deceleration stage of its reducer is PLE60? PLE120， PLE80? The maximum allowable flange should not be less than 60mm， nor greater than 120mm.

reducer生产-reducer-圣霖国际【精益求精】由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）是一家从事“型材设备,轧钢设备,轨道设备”的公司。自成立以来，我们坚持以“诚信为本，稳健经营”的方针，勇于参与市场的良性竞争，使“圣霖”品牌拥有良好口碑。我们坚持“服务为先，用户至上”的原则，使圣霖国际在行业专用设备中赢得了众的客户的信任，树立了良好的企业形象。 特别说明：本信息的图片和资料仅供参考，欢迎联系我们索取准确的资料，谢谢！