装夹后产品靠近活动钳口附近容易上翘、抬起，多次装夹一致性差。传统机用虎钳的螺旋副间隙较大，在使用中会产生较大振幅的振动；而活动座和虎钳体之间的滑动接触面较大，采用的间隙也较大。

After the clamping， the product is easy to  and lifted near the movable jaw， and the cistency of the clamping is poor many times. The spiral pair clearance of traditional machine vice is bigger， which will cause large amplitude vibration in use. The sliding contact between movable seat and jaw vice body is larger，圣霖联接机， and the gap used is bigger.

一个切向键只能传递一个方向的转矩，传递双向转矩时，须用互成120°～130°角的两个键。用于载荷很大，圣霖联接机多少钱，对中要求不严的场合。由于键槽对轴削弱较大 ，常用于直径大于100mm的轴上。

A tangent key can only transfer the torque of one direction. When the two-way torque is passed， the two keys of 120 to 130 degrees are required. An occasion for heavy load and no strict requirement. As the keyway is greatly weakened to the axis， it is often used on a shaft with a diameter larger than 100mm.

矩形花键联接是应用为广泛的花键联接。 应用广泛。如航空发动机、汽车、燃气轮机、机床、工程机械、拖拉机、农业机械及一般机械传动装置等等。渐开线花键的齿廓为渐开线，分度圆压力角α有30°及45°两种。齿顶高分别为0.5m和0.4m(m为模数)。

The rectangular spline connection is the most widely used spline connection. It is widely used. Such as aero engine，圣霖联接机价格， automobile， gas turbine， machine tool， engineering machinery， tractor， agricultural machinery and general mechanical transmission equipment and so on. The tooth profile of the involute spline is involute， and the pressure angle of the dividing circle is 30 and 45 degrees. The top of the tooth is 0.5m and 0.4m respectively (M is the modulus).

圣霖联接机价格-圣霖联接机-圣霖国际【客户至上】由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）在行业专用设备这一领域倾注了诸多的热忱和热情，圣霖国际一直以客户为中心、为客户创造价值的理念、以品质、服务来赢得市场，衷心希望能与社会各界合作，共创成功，共创。相关业务欢迎垂询，联系人：王秋。