在提高质量和产量的同时，还应该力求降低成本。因此如何能够优质高产，低成本的生产出合乎技术要求的钢材，是制定轧钢工艺生产工艺过程的总任务和总的要求。

At the same time，轧钢设备型号， we should try to reduce the cost while improving the quality and production. Therefore，轧钢设备厂家， how to produce high quality and low cost steel that meets the technical requirements is the general task and the general requirement for making the rolling process production process.

采用控制轧制工艺时，为了防止原始奥氏体晶粒过分长大，一般采用较低的加热温度和开轧温度。由于开轧温度高，变形后的奥氏体晶粒会发生再结晶而细化，如在这个阶段停止变第八节控制轧制技术形，轧钢设备，轧件即随温度下降而产生相变。

In order to prevent the original austenite grain growing too much， the lower heating temperature and rolling temperature are generally adopted in the rolling process. Due to the high rolling temperature， the austenite grain after the deformation will be recrystallized and refined. For example， the eighth section  rolling technology is stopped at this stage， and the phase change is produced as the temperature drops.

组织轧钢生产工艺过程首先是为了合格的，即合乎质量要求或技术要求的产品，并且要在保证产品质量基础上努力提高产量。这一任务的完成不仅取决于生产过程的合理性，而且取决于时间和设备的充分利用程度。

The process of rolling steel production is first made for qualified products， which are suitable for quality requirements or technical requirements， and we must strive to increase output on the basis of ensuring product quality. The completion of this task depends not only on the rationality of the production process， but also on the full utilization of the time and the equipment.

轧钢设备谁家好-轧钢设备-圣霖国际【精益求精】由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）为客户提供“型材设备,轧钢设备,轨道设备”等业务，公司拥有“圣霖”等品牌。专注于行业专用设备等行业，在辽宁 鞍山 有较高知名度。欢迎来电垂询，联系人：王秋。