凸模刃口端部修出斜面或弧形。这是减缓冲裁力的有效方法。减缓冲裁力，即可减轻对凹模侧材料的拉伸力，从而达到抑制冲压件产生翻料、扭曲的效果。

The end of the punch is repaired with a bevel or arc. This  an effective way to slow down the blanking force. By reducing the force of buffer, the tensile force of the side material of the die can be reduced, so that the stamping and twisting effect can be suppressed.

日常模具生产中，应注意维护冲切凸、凹模刃口的锋利度。当冲切刃口磨损时，材料所受拉应力将增大，从而冲压件产生翻料、扭曲的趋向加大。

In daily mold production, attention should be paid to sharpness of punching and concave die edges. When the cutting edge is worn, the tensile stress of the material will increase, and the stamping and bending will increase.

槽钢的锯削：槽钢的锯削与扁钢一样，但是要分二次从宽边面往下锯，不能在一个面上往下锯，应尽量做到在长的锯缝口上起锯，因此工件必须多次改变夹持的位置。

Channel steel sawing: the channel sawing of the channel steel is the same as that of the flat steel, but it must be sawed down two times from the wide side, and can not be sawed down on one surface, and should be sawed on the long saw mouth as far as  so the  of the clamping must be changed many times.